Blog

The need for energy is increasing day by day all over the world. Meeting the need for energy in sufficient quantities is of great importance for all business sectors. One of the easiest ways to balance energy production and demand is energy saving.

HBTherm Heat control device in a technically adjusted manner. Contributed to their support, @HB-Therm @Mihajlo Vulovic, and technical service. #knownmakina

What is Corrosion? Corrosion is an electro-chemical reaction. It is defined in DIN 50900 as ‘the reaction of metal material with its environment, which causes a measurable change in the raw material and damages the function of a metal component or a whole system’. In short...

Heat pump, in the most general definition, is a system that takes heat from one environment and carries it to another environment. It gathers heating, cooling and hot water usage in a single device.

We have completed the shipment and installation of the ac100 model chiller device from our air-cooled chiller devices requested by BAHAR POLIMER Company for the mould + oil cooling system of plastic injection machines.

We have completed the shipment and installation of the 2020 model CC150 Scroll Compressor Chiller Device, one of our Air Cooled Devices requested by SEPAR PLASTİK Company for PET Sheet Line.

We have completed the shipment and installation of the 2020 model CC150 Scroll Compressor Chiller Device, one of our Air Cooled Devices requested by SEPAR PLASTİK Company for PET Sheet Line.

We have completed the shipment and installation of the Chiller Water Chiller with 89.8kW 80.000 kCal cooling capacity to Çapa Domestic and Foreign Trade company.

The installation of the Cooling Device we produced for Sema Kalıp company, which is one of the leaders of the sector in the production of Plastic Injection Moulds, has been successfully installed.

We have completed the installation of cooling system devices to Sarıkaya Electric Home Appliances Company.

We delivered LANSON Brand Plastic Injection Moulding Machine to RISUS Health Products Company.

We sent 500.000 kw cooling device to Lezita, the delicious brand of Turkey.

Purpose of Cold Storage The purpose for which the cold storage will be used should be determined. Design and calculations should be made in accordance with the purpose for optimum performance. Products to be stored It is recommended to store only one type of product in each room. If the products...

The air handling unit ensures that the air taken from the atmosphere is sent to the environment through a number of processes. It provides fresh air flow to the environment, adjusting the temperature and humidity, purifying the air from dust and particles.

What are the 5 Things to Consider When Choosing an Air Cooled Chiller? Height One of the most important issues for air cooled chiller systems is height. As the height increases in these systems, the capacity decreases by 1%. For this reason, choosing the right chiller ...

7 Things to Consider When Choosing a Water Cooled Chiller Minimum Capacity When choosing a chiller, the characteristics of the region to be installed are taken into consideration. In places where there is no shortage of space and the temperature differences between day and night are high, water-cooled...

What is Industrial Cooling Device? What are the Areas of Use? The industrial cooling device keeps the heat and humidity balance in the desired environment at the desired level in a stable manner. Some materials may experience deterioration due to temperature increase or decrease. These deterioration, material ...

What are the Project Stages Before Chiller Installation? The first step for chiller installation is to obtain approval from the necessary institutions for the implementation of the project. Chiller installation should not be done without the approval of the relevant institutions. Within the plan prepared before installation, the passage places of pipes and ducts, ...

5 Things to Consider When Choosing an Air Cooled Chiller Height One of the most important issues for air cooled chiller systems is height. As the height increases in these systems, the capacity decreases by 1%. For this reason, choosing the right chiller ...

Chiller Cooling System Costs One of the most important parts when purchasing chiller cooling systems is the cost of the system. The costs of chiller cooling systems vary depending on many factors. For this reason, before the system is installed, chiller discovery ...

The use of chiller cooling systems is advantageous in many other aspects such as performance, power consumption and cost. Thanks to these features, it offers you a trouble-free, efficient and low-cost use for many years. Chiller cooling systems; in the desired sector, it...

Air-cooled chiller consists of condenser coils with fans on top. It is the preferred cooling method in plastic and rubber production processes. The condenser is a device that cools with air. Thanks to the fans on it, it cools the refrigerant passing through the condenser. Water

What is a Panel Type Cooler? - Where and What is it used for? These products, called Panel Type Coolers or Panel Air Conditioners, are part of the cooling system and are mostly used for ambient cooling. Panel Type Chillers working ...

Thermoconvector closed system tower, also known as Dry Cooler or Dry cooler. These systems and devices are specially designed to minimise energy cost in oil cooled applications. The machines that need to be cooled...

Cooling and heating has been a need since the existence of man, in history, mankind has tried to meet these needs by using various tools. Previously, it is estimated that people tried to meet the need for cooling with more water, over time, various ...

Water quality and cleanliness of each region is different. In this case, the cleaning of the water to be used in water cooling (chiller) groups is essential, the direct use of the water to be used without filtration damages the chiller over time and reduces its service life. From the water inside...

Factors Affecting the Selection of Chiller (Water Chiller) Group Information such as the operating water temperature of the chiller, the climatic conditions of the environment where it will operate, the desired cooling capacity, the distance of the ambient air to the sea, the height of the environment where it will operate from sea level, ...

Plastic injection moulding is the injection of melted plastic raw material into a mould with the help of temperature and then cooling and solidifying the material and removing it from the mould. Injection moulding is the most preferred method for producing plastic materials. This method...

What is Refrigerant? The fluids that provide heat transfer between the substances required for the cooling process are called refrigerants. What Does Refrigerant Do? As a result of the transfer of heat from the substance opposite the refrigerant to the refrigerant, the substance in question ...

What is temperature The concepts of temperature and heat are not the same. Temperature indicates the density or temperature of the object. Technically, it is the definition of the average speed of the molecules of a body. Heat is the amount of heat energy an object has, while temperature is...

What is cooling? It is the process of removing heat to reduce the temperature of a substance or environment below the temperature of the surrounding environment and to maintain it there. Summary of the history of cooling ‘Although cooling and heating processes are not as in today's modern conditions...

The purpose of use of these devices, whose original name is water cooling device but generally known by its English name as chiller, is to transfer heat from one source to another source. Chiller; The refrigerant gas in the refrigerant gas through the evaporator and compressor....

We present a small video footage from Plasteurasia2014 fair organised by Tüyap. Every year, we regularly participate in various fairs in the fields of plastics, raw materials, rubber, packaging, refrigeration and air conditioning at home and abroad and find the opportunity to introduce our devices to our customers.

29th International Istanbul Plastic Industry Fair As every year, we have taken our place in Plasteurasia2019 Istanbul fair this year. We follow the ever-advancing and ever-changing technology well and present our innovations in our devices to our customers.

Plastpak Izmir Fair We follow the fairs not only in Istanbul but also in our country and abroad with interest and we try to be present wherever there is a need. Plastpak Izmir fair is the most interesting fair of the Aegean and Mediterranean region organised every two years.